Attention: : Confluence is not suitable for the storage of highly confidential data. Please ensure that any data classified as Highly Protected is stored using a more secure platform.
If you have any questions, please refer to the University's data classification guide or contact ict.askcyber@sydney.edu.au
Skip to end of banner
Go to start of banner

Running Containers in Your Project

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Current »

Step 1. Go to Project → Project Details

Step 2. Configure Commands → Enable the container image

Step 3a (Automatic). Command Automation → Enable any desired automations

Currently this step must be done by a Site Manager. Please contact SydneyImaging.Admin@sydney.edu.au for assistance.

Step 3b (Manual). Then we are able to run XNAT at a "scan" level, you can click on "Run Container" or "Run" to run the container pipeline

Step 4.  Run the Container

Note: Feel free to explore the "Command Automation" settings and Command History Settings. Fore more info, please refer to XNAT Container Service Administration



  • No labels