Attention: Confluence is not suitable for the storage of highly confidential data. Please ensure that any data classified as Highly Protected is stored using a more secure platform.
If you have any questions, please refer to the University's data classification guide or contact ict.askcyber@sydney.edu.au
Skip to end of banner
Go to start of banner

Quantiflash Data - Symphony

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 15 Next »

Note -

  • Scattered signals are not displayed as they are irrelevant. Quantiflash does not emit well <400nm hence BUV395 plot is N/A & in the NIR hence why these plots look odd.
  • Recorded .fcs files need to be in a subfolder called 'laser_on'
  • Recorded .fcs files need to be in a subfolder called 'laser_off'
  • With this data - an optimal range of voltages can be determined. 
  • Height parameter used - has in testing matched manual voltration in testing. 

Protocol - 

  1. New experiment, all lasers on. 
  2. Set laser delays to 0
  3. Set all scaling factors to 0.5 (inc. FSC)
  4. Acquire data with QF scripter automatically changing the QF intensity every second - 1000 events/second, gaussian pulse - standard settings (FSC set to 400V)
  5. Set FSC so that all H/W FSC signals are on scale. 
  6. Set events to record to 20k.
  7. Record data with PMT volts from 0-1000 (25V increments) - PM for app to do this unattended (vchanger.exe)
  8. Put data in sub folder labelled 'laser_on' and 'laser_off' and run R script (updated in 2022)

SIGNAL:NOISE

LINEARITY

CV


  • No labels