Attention: Confluence is not suitable for the storage of highly confidential data. Please ensure that any data classified as Highly Protected is stored using a more secure platform.
If you have any questions, please refer to the University's data classification guide or contact ict.askcyber@sydney.edu.au
Skip to end of banner
Go to start of banner

Fortessa User Log

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 18 Next »

20180814 - Red laser has been replaced

The Fortessa red laser had failed and has been replaced and brought back to approximately identical signals. Application setting users please note the laser change, and ensure compensation controls are recorded, and the laser change noted. Please check signal levels off the red laser. We will not be re-recording a baseline for the instrument as the engineer has advised that the replacement has brought signals back to similar levels as before the laser failure. 

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.