WESTMEAD RESEARCH HUB | ACADEMIC | COMMERCIAL | ||||
Equipment / Service / Consumable | Cost in 2019 (non-assisted, p/h or consumable) | Cost in 2019 (operator-assisted, p/h or consumable) | Cost in 2018 (non-assisted, p/h or consumable) | Cost in 2018 (operator-assisted, p/h or consumable) | Cost in 2018 (non-assisted, p/h or consumable) | Cost in 2018 (operator-assisted, p/h or consumable) |
---|---|---|---|---|---|---|
Cell sorters | 50 | 76.50 | 75 | 114.75 | 150 | 229.5 |
Cell sorter setup | - | 76.50 per order | - | 114.75 | - | 229.5 |
Analysers - simple | 20.40 | 71.40 | 30.6 | 107.1 | 61.2 | 214.2 |
Analysers - intermediate | 30.60 | 81.60 | 45.9 | 122.4 | 91.8 | 244.8 |
Analysers - complex | 40.890 | 91.80 | 61.2 | 137.7 | 122.40 | 275.4 |
AutoMACS Pro | 20.40 | 71.40 | 30.6 | 107.1 | 61.20 | 214.2 |
GentleMACS | 5.10 | 56.10 | 7.65 | 84.15 | 15.30 | 168.30 |
Luminex 200 | 5.10 | 56.10 | 7.65 | 84.15 | 15.30 | 168.30 |
Assistance / Service | - | 51 | - | 76.5 | - | 153 |
Training - initial | - | 204 ($234.60 students - ISAC membership) | - | 306 ($336.6 students - ISAC membership) | - | 612 |
Training - subsequent | - | no charge | - | no charge | - | no charge |
Training - Cell Sorting | - | 400 | - | 600 | - | 1200 |
FlowJo Site Licence / per quarter | 100 / quarter* | - | - | - | - | - |
3D Printing | - | cost | - | quote | - | quote |
Polystyrene Test Tube with Cell strainer | 1.02 | - | 1.02 | - | 2.04 | - |
GentleMACS C Tubes | 7.548 | - | 7.548 | - | 15.096 | - |
GentleMACS M Tubes | 7.548 | - | 7.548 | - | 15.096 | - |
DAPI (20ul) | 4.08 | - | 4.08 | - | 8.16 | - |
96 well V bottom (+ lid) | 6.12 | - | 6.12 | - | 12.24 | - |
Filter mesh (packet) | 5.10 | - | 5.10 | - | 10.20 | - |
Attention: Confluence is not suitable for the storage of highly confidential data. Please ensure that any data classified as Highly Protected is stored using a more secure platform.
If you have any questions, please refer to the University's data classification guide or contact ict.askcyber@sydney.edu.au
General
Content
Integrations
Add Comment